Overview:
Specification of the main machine of the electronic tensile machine tester:
(1) High precision force sensor: 10-30KN force accuracy within ±0.8.
(2) High-precision 16bits A/D digital resolution is used.
(3) Power system: inverter + inverter motor + worm gear reducer + T-type ball screw.
(4) Control system: external control is adopted to make the control more accurate, and the speed control range is from 10 to 250mm/min.
(5) Display mode: 6-segment LED digital tube display.
(6) Testing space: 1150mm walking space for the joint plate (without fixture) (standard specification).
(7) Two-point extensometer for large deformation: resolution 1/100, accuracy ±1mm.
Micro-control tensile machine tester software function introduction:
(1) Test standard modularization function: Integration of the user to set the desired application of the test standard settings, wire pulling, tearing, stripping, cord, canvas, etc..
(2) Dial-out force, peel strength, etc.
Technical parameters:
|
burden element |
10-25KN range option |
|
speed range |
1-200mm/min (special test speed can be customized according to customer's requirement) |
|
Effective test stroke |
600mm |
|
Using the power supply |
380V 50HZ |
|
power (output) |
Approx. 2KW |
|
Machine Size |
Approx. 700 x 830 x 2250mm L x W x H |
|
Machine weight |
Approx. 700kg |
