SLXS-DC rubber and plastic low-temperature brittleness testing machine compressor refrigeration

Overview:

SLXS-DC rubber and plastic low-temperature brittleness tester is to determine the material under the specified conditions of the specimen by the impact of the destruction of the highest temperature, that is, the brittleness temperature, plastics and other elastic materials in low-temperature conditions for the comparative identification of the use of the performance. SLXS-DC rubber and plastic low-temperature brittleness tester compressor refrigeration can be determined by the brittleness temperature of different rubber materials or vulcanized rubber of different formulas, and the advantages and disadvantages of the performance of low-temperature. Performance advantages and disadvantages. Therefore, it is indispensable in the quality inspection of scientific research materials and their products, and the control of the production process, etc. SLXS-DC rubber-plastic low-temperature brittleness tester compressor refrigeration is designed according to the national standard GB/T1682-1994, and the various technical indexes are in line with the HG 2-162-1965 low-temperature impact compression test method for plastics and GB5470-2008 impact brittleness temperature test method for plastics. Impact embrittlement temperature test method and other national standards.

Technical parameters:

 

Test temperature and time

-80 degrees (normal more than 1 hour) cooling time is short, without water cooling, more environmentally friendly
impact velocity

2m/s±0.2m/s

Temperature fluctuation during the test 3min time after constant temperature

<±0.5℃ small fluctuation, more accurate temperature control
Distance from center of impactor to lower end of gripper

11±0.5mm

Dimensions

760*550*1300
power (output)

800W power is smaller, after reaching the temperature of the compressor there is an automatic shutdown, more environmentally friendly energy saving

capacity

3500 ml Larger volume, wider test range