Overview.
Rubber hose and plastic hose low-temperature bending test device based on GB/T5564-2006/ISO4672:1997 standard method B: low-temperature bending test and the design of the specification noted. The low-temperature flexing test of hose should have two test devices with different test performance. One is the low-temperature flexing test device. One based on GB/T5563-2005/ISO1402:1994 standard hydrostatic test method, in charging and adding 0.07MPA hydrostatic pressure back to see the specimen with or without cracking and rupture, and thus accurately fill in the test report to determine the quality of the specimen. For the above two different standards for the test requirements, the design and production of a low-temperature bending test chamber and a standard charging hydrostatic device. The test device in line with GB/T5564-2006/ISO4672:1997 "rubber and plastic hose low-temperature bending test" in the method B: low-temperature bending test method of the test requirements.
Technical parameters:
|
Temperature adjustment range |
0～-60℃ | Torque Detection Range | 0~300Nm |
| control accuracy | ±1°C | Torque Detection Accuracy |
0.03% |
|
Maximum power consumption |
210W | Time setting control range | 0 to 99h99min |
| Supply Voltage | AC220V±10% | Bending test device shape and size |
800*800*1100(mm) |
